2k Harderner STD slow

This product is a standard slow hardener for 2K products. Its main usage is for chemical curing of Acrylic 2K Topcoats for automotive vehicles. This is specifically formulated for Ritver 2K Acrylic topcoats and clear coats. Suitable for use at normal temperature.

The 2K Acrylic Topcoat mixed with ARP004 hardener shows medium pot life and speed of cure. After drying, the catalyst allows the acrylic to obtain a hard film with good clarity and fair light fastness. The catalyst however doesn’t prevent the acrylic from yellowing upon ageing.

Keep the cans tightly close in a well-ventilated place. Temperature should be controlled and kept between 10 – 30 ⁰C. The product is moisture sensitive and reacts with atmospheric humidity; it is essential to keep it from moisture contamination.
Product can be kept up to 6 months from its production date only if storing instructions are followed correctly.

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.
MSDS is available on request for the safe handling of this product.
FIRST AID:
Eyes: In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved Industrial cleaner. DO NOT USE solvent or thinners.
Inhalation: Remove to fresh air, loosen collar and keep patient rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.