2k white

RITVER 2K ACRYLIC WHITE is a high build topcoat based on acrylic polyol and aliphatic isocyanate. The product is strongly recommended as a pigmented topcoat for all kinds of vehicle refinish. It exhibits excellent opacity, weather resistance, gloss retention, color fastness, as well as balanced hardness and flexibility.

RITVER TOPCOAT 2K is most suitable to be applied over 2K Ritver Primer (PS 1756).

Ensure that the surface is properly prepared,sanded and smoothened. Blow offsanding dusts using compressed dry air and then clean using a solvent degreaser to remove oils, grease and grimes before any application paint application is conducted. Use a new cloth so as to ensure that re-contamination is avoided. Apply the primer, PS1756, then sand it then over coat it with RAP Topcoat

1. It is strongly recommended to use personal protective equipment during application.
2. Product should be stirred properly prior to use.
3. Prior to application, use of filter is recommended to avoid dust particles.
4. Clean the gun properly before and after usage.

Under dry and cool condition, Storage stability can be sound up to 2 years in original sealed containers.

Disposal: As per the guidance and legislations of the local Authority e.g., by controlled landfill. In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.

Caution: It is strongly advised not to keep open half used drums asit forms a skin on the top layer.

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapour or spray. MSDS is available on request for the safe handling of this product.

FIRST AID

Eyes: In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved Industrial cleaner. DO NOT USE solvent or thinners. Remove to fresh air, loosen collar and keep patient rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.
NOTE:
This product can be used even as non-yellowing fixative on lacquer manufactured, treated with ageing products; be sure of the compatibility with the products used in the varnishing cycle.