AC/Polyster Thinner

All RITVER thinners listed are to be used in conjunction with the corresponding products and systems intended for, or any Technical guidance required may be obtained by the end user.
Caution: While excess usage / over thinning is not advisable in any system, one can add 10 – 20% of the concerned Thinner for ease of application of spray for PE basecoat (clear and pigmented), and for PE topcoat (clear and pigmented).
Advantage: Quickly reduces the consistency of the lacquer to the required degree.
Improves film smoothness of lacquers when applied either by spray or dipping thus extending excellent finish.
Lacquer driers without blushing, resin blush, pin holing and other surface defects.
No orange peel developed after the evaporation of PE Thinner, and therefore increase the tensile strength of the film along with its gloss.

Available in 1Ltr, 5Ltr, 5USG, 10x5USG.
Store in a cool and well ventilated place. Keep away from direct sunlight. 18 months in unopened container, stored in a cool and dry condition at 25°C.

Disposal: As per the guidance and legislations of the local Authority e.g., by controlled landfill.
In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.
Flash Point: Individual flash points are mentioned in the table along with other details and a prior knowledge of the flash points is a pre requisite for the safe handling of the RITVER thinners.

First Aid:
Eyes In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.
Skin Wash skin thoroughly with soap and water or approved Industrial cleaner. DO NOT USE solvent or thinners.
Inhalation Remove to fresh air, loosen collar and keep patient rested.
Ingestion In case of accidental ingestion DO NOT INDUCES VOMITING. Obtain immediate medical attention.