All weather texture

Ritver Ritver All Weather Texture is a high performance, durable pure acrylic based textured emulsion paint with specially selected pigments and fillers. The product exhibits good crack bridging properties and weather resistance. It has excellent anti mold and antifungal properties.

Substrates: Cement renders, masonry bricks, concrete, etc…
Area of Use: Exteriors Surfaces

Ensure that substrate is dry free of surface contaminants. Ensure that the substrate has been cured for at least 28 days before painting. If the substrate has not been cured for 28 days, it is advisable to treat the surface with a mild acid to reduce the alkalinity.

For old concrete surfaces, remove laitance and other loose materials. Repair damaged surfaces
with cement based fillers and surfaces.

Do not apply the product in adverse weather conditions, like the temperature is below 10C or above 35C, when it is raining and the paint can get wet while it is not yet dried.

The product is ready for application using roller or brush. It can be diluted with up to 5% of potable water.

Apply using a foam roller usually used for textured paints. The profile of the texture depends on the pores of the roller. Apply two coats ensuring that the first coat is dried before the application of the subsequent coat.

Under dry and cool condition, storage stability can be sound up to 12 months in original sealed containers.

HANDLING
Disposal: As per the guidance and legislations of the local Authority e.g. by controlled landfill. In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.
Flash Point: Not applicable
Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.

MSDS is available on request for the safe handling of this product.

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream. Other industrial practices are applicable. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.
MSDS is available on request for the safe handling of this product.

FIRST AID
Eyes: In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO NOT USE solvent or thinners.
Inhalation: Remove to fresh air, loosen collar and keep patient rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.