Anti Mosquito emuslion

Ritver Anti Mosquito Emulsion is a special grade Emulsion Paint with insecticidal and insect repellant properties. The product incorporates a safe and environmentally friendly repellant and insecticide which repells mosquitoes and other flying and crawling insects, making your home safer from vector carrying insects specially Aedes Mosquitoes.

Ritver Anti Mosquito Emulsion incorporates newly developed biochemical actives derived from Eucalyptus oil in conjunction with an insecticide that was originally mimicked from pyrethrum, a chemical found in chrysanthemum. These repellant and insecticide present in Ritver Insectishield Emulsion are mostly used in insect repellant lotions and creams which are used in direct contact with human skin so users of the paint are assured of the safety of the product inside their homes. 100% SAFE Compared to insecticidal sprays, Ritver Anti Mosquito / Insect Emulsion poses less risks to humans since it is fumes and vapors free. Conventional insecticidal sprays can enter the human body thru the mouth, nose or skin. The actives present in the paint are embedded in the resin matrix and works only when the insects crawls or lands on it.

Designed for use on new or previously painted masonry surfaces such as bricks, plaster, cement renders and other properly primed building material surfaces.
Area of Use: Indoors

• Repels Mosquitoes and other flying and crawling insects
• Insecticidal, knocks down mosquitoes on contact
• Highly Washable surface
• Luxurious Eggshell Matt Finish
• Free of Lead, Mercury and other heavy metals
• DEET Free

A good surface preparation and following the method statement / recommended system procedure of Ritver is an ideal recommendation for the application of Ritver Anti Mosquito Emulsion.

For Plaster, Masonry & Concrete:
Achieve a good and clean surface by removing all contaminants and loose particles by cleaning & drying. A laitance free surface should be achieved by good sweep blast or a wire brush. Water washing under pressure is recommended.

For Old and Painted surfaces:
In case of surfaces which are painted / or aged and is visible dusting, chalking or even friable ensure that all the loose material is removed by scrapping with metal brush. Apply a good coat Ritver Fungicidal wash compound and allow drying. Follow this by a regular coat or two of Ritver PVA Primer Sealer or Ritver Alkali Resistant Primer and continue as in the above case.

Application:
Brush or Roller – `No dilution required
Air Spray – Dilute up 10% max
Airless Spray – Ready to use
Clean equipments using clean tap water.

Under dry and cool condition, storage stability can be sound up to 12 months in original sealed containers.

HANDLING
Disposal: As per the guidance and legislations of the local Authority e.g., by controlled landfill. In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.
Flash Point: Not applicable.

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream. Other industrial practices are applicable. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.
MSDS is available on request for the safe handling of this product.

FIRST AID
Eyes: In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO NOT USE solvent or thinners.
Inhalation: Remove to fresh air, loosen collar and keep patient rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.