PW 3404CG_NANO Stone Finish Top coat GLOSS

Ritver Nano Guard Topcoat is a durable and elegant protective clear finish coat formulated using Nano particulate materials that exhibits both oleo and hydrophobic properties. The product effectively resists dirt and soiling, easier to clean and longer lasting. The product can be applied over textured Finishes and ordinary emulsions for both interior and exterior spaces without drastically altering the color. It comes in semi-gloss and matt finish offering a wider choice of sheen to the design.

Substrates: Any water based painted substrates.
Area of Use: Interiors/ Exteriors

Ensure that substrate is dry free of surface contaminants like oils, grease, release agents.

Product can be applied using conventional spray, roller or brush.

The product is ready for application. It can be diluted with up to 5% of potable water depending on the porosity of the substrates to be painted.

Do not apply the product in adverse weather conditions, like the temperature is below 10C or  above 35C, when it is raining and the paint can get wet while it is not yet dried.

Under dry and cool condition, storage stability can be sound up to 12 months in original sealed containers.

HANDLING
Disposal: As per the guidance and legislations of the local Authority e.g. by controlled landfill. In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.
Flash Point: Not applicable
Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.

MSDS is available on request for the safe handling of this product.

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream. Other industrial practices are applicable. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.
MSDS is available on request for the safe handling of this product.

FIRST AID
Eyes: In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO NOT USE solvent or thinners.
Inhalation: Remove to fresh air, loosen collar and keep patient rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.