logo
icon
logo

NC Topcoat Clear (5%-10%-30%-50%-Gloss)

Superior Grade single pack transparent Nitrocellulose Topcoat finish modified with special resin, exhibits excellent clarity, durability and scratch resistance to mechanical damages, grease, oil, and detergent. It is designed for modern and old style furniture frames and manufactured wood of different nature.

SKU: NT12XX

  • spe_5

    Appearance

    10%, 30%, 50%, Gloss
  • spe_5

    Color

    Any color as per Ritver color chart or any International color chart
  • spe_5

    Specific gravity

    0.970 – 1.20 kg/L
  • spe_5

    Weight Solids

    Approx. 28% [± 2]
  • spe_5

    Viscosity

    10000 ± 1000cp @ 27/29 ̊
  • USES
  • SURFACE PREPARATION
  • PRODUCT PREPARATION
  • APPLICATION METHODS
  • CLEANING & CAUTION
  • PACKING & STORAGE
  • SAFETY & FLAMMABLE

Suitable for Interior Use and mass production due to fast drying time. Easy application by conventional spray, airless and curtain coater.

All timber species must be fully aged with a moisture content of less than 15%. The surface must be dry, clean and free from contaminations. Natural oil or gum must be removed by solvent cleaning. Always check compatibility with required [stains / sealers] or similar pretreatment. It is essential to sand the applied sealer by utilizing paper no [400], as an adequate light sanding and dust removal prior of application of [NT12XX] Ritver NC topcoat clear.

Stir product well with a flat paddle. Thin to the required viscosity in both instances ensuring the product is homogeneous after stirring. For details of spray equipment contact Ritver Technical Services Department.
Dilution
Utilize Ritver NC Thinner depending on the application system used. In general 100% thinner is added to achieve an application viscosity; this is suitable for spray application.
In case of hot climate and higher humidity add 3% of [TN122] NC retardant thinner

Depends on the finishes required but in general an appropriate rate is 120g / sq. m. The number of coats depends on the surface preparation the porosity of the substrate, and the finish required.
This quality can be reduced if applied over polyester.

Cleaning
Clean all tools and equipment immediately after use with [TC010] Tool cleaning.
Caution
Do not use when humidity levels may cause surface condensation (maximum 85%), during rainy conditions or if temperatures are likely to fall below 5°C during application and drying. Protect from frost.

Available in 3.5Ltr, 18Ltr, 200Ltr.
Store in a cool and well ventilated place. Keep away from direct sunlight. Maximum 18 months in unopened container, stored in a cool and dry condition at 25°C.

This material is flammable and must not be exposed to naked flames.
Use only in well ventilated areas. In case of insufficient ventilation during application wear suitable respiratory equipment. Do not breathe vapor / spray.
In case of contact with eyes, rinse immediately with plenty of sweet water and seek medical advice. In case of contact with skin, wash immediately with soap and water or a recognized skin cleanser. Keep away from sources of ignition. No Smoking. Keep out of reach of children.

Related products