logo
icon
logo

NC White Primer European

European Grade single pack Nitrocellulose primer surfacer exhibits very good hiding power, dries outstanding, filling flexibility with easy sanding properties. It contains valuable raw materials that provide Very good adhesion properties on porous wood. This ensures overcoat with spreading rate to a wide range of subsequent NC pigmented topcoats of various levels of sheen.

SKU: NB910

  • spe_5

    Color

    White
  • spe_5

    Specific gravity

    1.20 kg/L [±0,025]
  • spe_5

    Weight Solids

    Approx. 50% [± 2]
  • spe_5

    Flash point

    21°C
  • USES
  • SURFACE PREPARATION
  • PRODUCT PREPARATION
  • APPLICATION METHODS
  • CLEANING & CAUTION
  • PACKING & STORAGE
  • SAFETY & FLAMMABLE

Ideal for interior use on all types of furniture and timber, e.g. chipboard, plywood, etc…., especially where early sanding is required and speed of over coating is essential. It can be over coated with subsequent pigmented topcoats of different shades: Matt / S. gloss / H. gloss finishes.

All timber species must be fully aged with a moisture content of less than 15%. The surface must be dry, clean and free from contaminations. Natural oil or gum must be removed by solvent cleaning.
To obtain optimum surface finish, sand the wood properly in the same direction of the wood grain, utilize sanding paper no. [120] to achieve smooth surface, as is adequate sanding and remove dust prior to application of first coat of [NB910] NC Primer Surfacer.

Stir well before use. Thin to the required viscosity ensuring the product to be homogeneous.
Dilution
Utilize [TN190] NC Thinner depending on the application system used. In general 75 to 100% thinner is added to achieve an application viscosity. This is suitable for the spraying application.
For Curtain coater application utilize [TN190] NC Thinner at 50 to 75%.
In case of hot climate and higher humidity, add 3% of [TN122] NC Retardant Thinner.

Depends on the finishes required but in general an appropriate rate is 120 g /sq.m. The number of coats depends on the surface preparation the porosity of the substrate, and the finish required.
For details of spray equipment contact Ritver Technical Services Department

Cleaning
Clean all tools and equipment immediately after use with [TC010] Tool cleaner.
Caution
Do not use when humidity levels may cause surface condensation (maximum 85%), during rainy conditions or if temperatures are likely to fall below 5°C during application and drying. Protect from frost.

Available in 3.5Ltr, 18Ltr, 200Ltr.
Store in a cool and well ventilated place. Keep away from direct sunlight. Maximum 18 months in unopened container, stored in a cool and dry condition at 25°C.

This material is flammable and must not be exposed to naked flames.
Use only in well ventilated areas. In case of insufficient ventilation during application wear suitable respiratory equipment. Do not breathe vapor / spray.
In case of contact with eyes, rinse immediately with plenty of sweet water and seek medical advice. In case of contact with skin, wash immediately with soap and water or a recognized skin cleanser. Keep away from sources of ignition. No Smoking. Keep out of reach of children.

Related products