PW 3305-AB_Platinium emulsion SIlk Anti Bacteria

Ritver Platinum Emulsion Silk Anti-Bacterial is an attractive wall coating based on a blend of modern polymers that provides durable, washable and antiseptic surface, promoting a healthier indoor environment. The material incorporates Nano silver which is proven to effectively kill almost all disease causing microorganisms, even MRSA.

Ritver Platinum Emulsion Silk Anti-Bacterial provides a permanent sterile surface as long as the paint surface is intact. It is particularly recommended for use in Healthcare facilities such as hospitals, clinics and other medical facilities, food processing plants, restaurants or any other indoor spaces requiring a bactericidal surface.

Substrates: Concrete, plaster, gypsum board, wood.
Area of Use: Interiors

All surfaces must be sound, clean, dry and free from loose and flaking materials, dirt, efflorescence, oil grease and other surface contaminants.

Apply Ritver Alkali Resistant Primer and apply stucco putty to even out the surface and fill small cracks. Remove all sanding powders by blowing air or vacuuming the surface.

The product can be applied by roller, airless spray or by brush. Thin the material up to maximum of 20 percent if the application method demands. Do not over thin the product! Always ensure adequate ventilation during paint application for reason of health and safety and also for proper drying of the paint.

Under dry and cool condition, storage stability can be sound up to 12 months in original sealed containers.

HANDLING
Disposal: As per the guidance and legislations of the local Authority e.g., by controlled landfill. In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.
Flash Point: Not applicable.

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream. Other industrial practices are applicable. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.
MSDS is available on request for the safe handling of this product.

FIRST AID
Eyes: In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO NOT USE solvent or thinners.
Inhalation: Remove to fresh air, loosen collar and keep patient rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.