Polyester Fibre

RITVER FIBER POLYESTER PUTTY – PP8001SH is a fiber reinforced high-build polyester putty; specially formulated to offer excellent adhesion, strength and ease of application on fiber parts, metal and steel.

It is meant to fill deep dents, cracks, to repair deep scratches and restore structural integrity of damaged and/or uneven surfaces of automobiles. It can be applied over metal surfaces and glass fiber reinforced plastic.

The metal surface must be clean, dry and free from oil, dirt, and other contamination.

✓ Very good adhesion
✓ Very good coverage
✓ Very good sanding
✓ Very good plasticity
✓ Very good hardness

Store in a cool and well-ventilated place. Keep away from direct sunlight. Maximum 12 months in unopened container, stored in a cool and dry condition at 25°C.

Disposal: As per the guidance and legislations of the local Authority e.g., by controlled landfill. In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.
Caution: It is strongly advised not to keep open half used drums as it forms a skin on the top layer.

This material is flammable and must not be exposed to naked flames.
Use only in well-ventilated areas. In case of insufficient ventilation during application wear suitable respiratory equipment. Do not breathe vapor. In case of contact with eyes, rinse immediately with plenty of sweet water and seek medical advice. In case of contact with skin, wash immediately with soap and water or a recognized skin cleanser. Keep away from sources of ignition. No Smoking. Keep out of reach of children.