Polyester Putty Light

POLYESTER PUTTY LIGHT – PP8004 is a lightweight two-component Polyester based putty; Formulated to exhibit very good adhesion and high elasticity. This product is suitable for large surface areas; is easy to apply and provides excellent sandability.

It is meant to repair dents, cracks, joints or scratches and to relatively smoothen uneven surfaces in Automobiles.

This product can be applied over any type of metal surface (steel, aluminum, etc.), glass reinforced plastic (GRP/fiberglass) or on old finishes given they are prepared properly. Prior to application, the surface must be clean, dry and free from oil, dirt, and other contamination.

✓ Very good adhesion
✓ Very good sanding
✓ Very good plasticity
✓ Very good hardness
✓ Very good coverage

Store in a cool and well-ventilated place. Keep away from direct sunlight. Maximum 12 months in unopened container, stored in a cool and dry condition at 25°C.

Disposal: As per the guidance and legislations of the local Authority e.g., by controlled landfill. In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.
Caution: It is strongly advised not to keep open half used drums as it forms a skin on the top layer.

This material is flammable and must not be exposed to naked flames.
Use only in well-ventilated areas. In case of insufficient ventilation during application wear suitable respiratory equipment. Do not breathe vapor. In case of contact with eyes, rinse immediately with plenty of sweet water and seek medical advice. In case of contact with skin, wash immediately with soap and water or a recognized skin cleanser. Keep away from sources of ignition. No Smoking. Keep out of reach of children.