PU PARQUET WATER BASE CLEAR FOR INTERIOR

A waterborne Odorless Polyurethane Basecoat/ topcoat clear matt, suitable for the varnishing of indoor parquet. It is used as a base coat and top coat at the same time. It shows a top performance in terms of clearness, drying and hardness, such as to be compared to the traditional polyurethane finish. It has a low solvent content and excellent flow leveling. This item has a low VOC, less than 3% as an environmental friendly product.

For Interior use, such as varnishing of indoor parquet.

We suggest a good sanding of the wood substrate before application of [WBI1028X]. As stain, we suggest our universal or nitro stain series.

Dilution
Product ready for use. Eventually it is possible to dilute with water at 5-10% max.

Following Treatments
By spray gun. The product is ready for use; in winter time it is not advisable to thin down the product but it is recommend to use the pre-heater set between 35°C and 45°C; in warmer times it is advisable to thin down the product from 5% up to 10% max. with water and to use the pre-heater at a max. temperature of 35°C.
The product viscosity generally enables the application of 100-120 micron humid thickness without dripping; it is not advisable to apply higher thickness as film sanding and flow levelling would be impaired. Suggested nozzle: for airless 09 fixed or 015 adjustable at 4 atm/bar of pressure; for normal sprayt gun 2.0 mm. at 3.5-4 atm/bar of pressure.
Check very carefully that the spray-gun does not show any trace whatsoever of solvent from previous applications. It is advisable to wash varnishing tools immediately after use.

Clean all tools and equipment immediately after use with water.

Available in USG, 5USG.
Store in a cool and well ventilated place. Keep away from direct sunlight. Maximum 18 months in unopened container, stored in a cool and dry condition at 25°C.