logo
icon
logo

PU Topcoat Clear ANTI SCRATCH (5%-10%-30%-50%-Gloss)

PU Clear scratch proof matt is two components scratch-Proof clear Polyurethane topcoat with high mechanical resistance and soft slippery touch.
It exhibits a fast drying, good transparency, very good leveling with good equalization of matting effect, Anti-stain, Anti scratch properties.

SKU: PT25X0 SP

  • spe_5

    Appearance

    5%, 10%, 30%, 50%, Gloss
  • spe_5

    Color

    Transparent
  • spe_5

    Specific gravity

    1.00 kg/L. [±0.025]
  • spe_5

    Weight Solids

    Approx. 45% [± 2]
  • spe_5

    Flash point

    21°C
  • USES
  • SURFACE PREPARATION
  • PRODUCT PREPARATION
  • APPLICATION METHODS
  • PACKING & STORAGE
  • SAFETY & FLAMMABLE

It can be used for all interior furniture (wardrobes, closet, paneling, doors, windows, frame, and casting). All the property of this product are developed to get the best result and make enable to have unlimited possibility for application in furniture industry.

All timber species must be fully aged with a moisture content of less than 15%. Surface must be dry, clean and free from contaminations. Natural oil or gum must be removed by solvent cleaning.
Before the apply topcoat PT25X0, wait that the sealer is full dry and sand it with sanding paper No.400.

CATALYST

By weight By volume
50% CP007 50%

Pot Life 3 hrs. @ 25°C
Dilution
Use PU thinner TP292 to dilute the system:
– 25 -30% of thinner for spray application; –
25% of Thinner for Curtain application.
In case of humidity weather can be used 5-10% [TP222] PU retardant thinner.

The number of coats depends on the porosity of the substrate and the finish good decide.
Appropriate Rate: 130 gr/ sq.m.
Following Treatments
By spray gun: Use nozzle 1.8-2mm at 3-4 ATM/bar. It is possible to use airless and air-mix equipment. For details of spray equipment contact Ritver Technical Services Department.
By Curtain Coater: It is recommended to control the viscosity during application by add PU Thinner to balance the evaporation of solvent.
Clean all tools and equipment immediately after use with [TC 010] Tool Cleaning.

Available in 5Ltr, 25Ltr.
Store in a cool and well ventilated place, with temperature controller between 10 to 30°C. Keep cans tightly close. For the shelf life, maximum 18 months from the production date, if the stored advice are followed.

This material is flammable and must not be exposed to naked flames. Keep away from sources of ignition. No Smoking. Keep out of reach of children.
Use only in well ventilated areas. In case of insufficient ventilation during application, wear suitable respiratory equipment. In case of contact with eyes, rinse immediately with plenty of sweet water and seek medical advice. In case of contact with skin, wash immediately with soap and water or a recognized skin cleanser. For health and safety information, please refer to relevant SDS.

Related products