Roof Coating Compound

Ritver Roof Coating Compound is a special formulation based on a liquid membrane based on a highly resilient polymer containing inert pigments. It has good alkali resistance properties and it is
extremely low toxicity and odor.
It is the most ideal choice for the protectionof all types of roofs,walls made of concrete, tiles, wood, bricks etc. It is resistant to the diffusion of carbon dioxide to a great extent. It is an Anticarbonation product with excellent water proof properties, it is resistant of the degradation of UV & sun light as well as mold & algae.

Substrates: Concrete, plaster, tile, bricks and timber.
Area of Use: Interiors / Exteriors

A good surface preparation and following the method statement / recommended system procedure of Ritver is an ideal recommendation for the application of Ritver Roof Coating Compound.
For Roofs & walls of various types:
Achieve a good and clean surface by removing all contaminants and loose particles by cleaning & drying. A laitance free surface should be achieved by good sweep blast or a wire brush. Water washing under pressure is recommended. If fungus is present then a good coat of EVI fungicidal
wash compound is to be applied and rinsed properly after thorough drying. In case of interiors it is advisable to clean with a damp cloth.
Exclusions for successful application include perpetually wet surfaces and also large cavities on wood, concrete surfaces.

Ritver Roof Coating Compound can be applied by brush, roller, trowel or spray. Apply first coat diluted with 2-3% sweet water. Apply 2nd and 3rd coat without dilution to achieve film thickness of maximum 2-3mm. Allow to dry overnight between successive coats. Adequate ventilation is an ideal situation as it helps in drying and the good application itself. Avoid
high humid conditions i.e., >95% when condensation is likely to interfere and also when the surface temperature is at least 3°C above dew point.
One can add 5 to 10% of sweet water for ease of application depending on the suitability of application.
1. Brush/ Roller: Apply an even coat spreading uniformly.
2. Trowel: Apply an even coat spreading uniformly.
3. Spray: Make an uniform spray of the product with just enough dilution.

Under dry and cool condition, storage stability can be sound up to 18 months in original sealed containers.
HANDLING
Disposal: As per the guidance and legislations of the local Authority e.g., by controlled landfill. In
case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.
Flash Point: Not applicable.

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles,dust mask and gloves. Use a barrier cream. Other industrial practices are applicable. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapour or spray.
MSDS is available on request for the safe handling of this product.
FIRST AID
Eyes: In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved Industrial cleaner. DO NOT USE solvent or thinners.
Inhalation: Remove to fresh air, loosen collar and keep patient rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.