Roof Coating Compound

ELASTOCRYL 800 is a high solid content thixotropic liquid-applied, water based acrylic waterproof elastomeric with outstanding adhesion to various substrates.
ELASTOCRYL 800 is a permanently flexible membrane that can be re-enforced with fiber glass mesh for high tensile strength and toughness.
ELASTOCRYL 800 complies with ASTM C957-1998.

ELASTOCRYL 800 is used in areas where water dampening of surfaces is critical. It has the ability to uniformly cover the profile of textured substrates, forming a continuous membrane.
ELASTOCRYL 800 effectively covers existing hairline cracks and repaired areas, and bridges hairline cracking caused by structure movement.
ELASTOCRYL 800 is ideal for waterproofing concrete roof, balconies, wood, glass,asbestos, tiles, metal surface and masonry building exteriors.
ELASTOCRYL 800 acts as waterproofing membrane in concrete water storage tanks,retaining walls, swimming pools, kitchens and bathrooms

• One component liquid applied.
• Moves with crack bridge > 2 mm.
• Adheres tenaciously to cement-based surfaces.
• Non-toxic, suitable for drinking water reservoir.
• Fiber re-enforcement will provide high strength.
• Available in wide range of colors.
• Hard wearing – durable.
• Primerless.
• Excellent UV resistance.
• Applicable to apply on floors and walls

All surfaces should be clean, dry and free from dust and other contaminants. A dry sponge should be used to remove water on wet surfaces. Treat oil or grease contamination with degreaser followed by water or steam cleaning.
New and unpainted surfaces must be structurally sound, clean, dry, fully cured, and free from dust, curing agents, form release agents, efflorescence, scale, or other foreign materials.
All cracks larger than hairline must be repaired with RENDACOAT FC cementitious concrete repair. Remove all unsound concrete. Patches shall be flushed with the surrounding surfaces and shall match the texture of existing surfaces. Angle filet and corners should be arranged by using RENDAGROUT HB and kept to full cure before applying ELASTOCRYL 800.

ELASTOCRYL 800 is a single component material. Remix and apply direct into the substrate

ELASTOCRYL 800 may be applied by roller or airless sprayer. A brush may also be used for touch-up and edging work or for areas unsuitable for spray application. Airless spraying and rolling are the most effective methods of application for obtaining a uniform film build.
ELASTOCRYL 800 is a single component material. It is necessary to thoroughly mix the container before the application using a slow speed mixer.
ELASTOCRYL 800 has a rich thixotropic consistency. The addition of water reduces this thixotropic nature and decreases the ability to achieve heavy film builds with good vertical hold.
COVERAGE
Actual coverage may vary depending on the surface profile, porosity, method of application and job conditions. ELASTOCRYL 800 is applied at a rate of 14 – 16m2/gallon at thickness of 250 microns WFT per coat.
CLEANING
Tools and equipments must be cleaned immediately by using sweet water.
PACKAGE
1, 5 USG.
STORAGE
Product should be at 25°C in dry conditions.
SHELF LIFE
12 months in a tightly closed container.

HEALTH AND SAFETY
Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream.
Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapour or spray. MSDS is available on request for handling of this product safely.
FIRST AID
Eyes: In case of accidental splashes, flush the eyes with warm water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO NOT USE solvent or thinners.
Inhalation: Movie the patient to an open space area, loosen collar and keep him rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical help.