PW 2605_Texture Medium

Ritver Texture Medium is a tough coating based on acrylic polymer latex, pigmented with titanium dioxide and other alkali resistant pigments with good light fastness. It forms a good aggregate with a selected range of mineral quartz and other texture inducing combinations of rock. Its formulation incorporates fungicides and algaecides, and it exhibits outstanding weather resistance. [This product is certified by Dubai Central Laboratory following DM-DLCD-RD-DP21-2180-(IC) Specific Rules for Low Emitting Materials as per the 2017 Al Sa’fat Dubai Green Building Evaluation System.]

Substrates: Concrete, plaster, masonry, gypsum, block work and timber.
Area of Use: Interiors & Exterior with a textured finish.

A good surface preparation and following the method statement / recommended system procedure of Ritver is an ideal recommendation for the application of Texture Medium.

For Plaster, Masonry & Concrete:
Achieve a good and clean surface by removing all contaminants by cleaning & drying. A laitance free surface should be achieved by good sweep blast or a wire brush. Before applying the Ritver Texture Medium apply one coat of Ritver Alkali Resistant Primer or Ritver All Weather Primer (EXT) and allow drying. Apply one good coat or two nominal coats with a medium roller and spread the same evenly to the desired texture.

For Old and Painted surfaces:
In case of surfaces which are painted / or aged and if there is visible dusting, chalking or even friable, ensure that all the loose material is removed by scrapping or metal brush. If the situation is critical it is recommended to do torching of the same and apply a good coat of Ritver Fungicidal wash compound and allow drying. Follow this by a regular coat or two of Ritver Alkali resistant primer and continue as in the above case with the full system.

For Wood & Timber:
Achieve a good and clean surface by removing all contaminants by cleaning & drying treatment with Ritver Wood Preservative is advisable. Start of with a good coat of Ritver Wood Primer and allow to dry well. Follow this by a regular coat or two of Ritver Alkali Resistant Primer and continue as in the above case with the full system. Exclusions for successful application include perpetually wet surfaces and also large cavities on wooden surfaces.

Exclusions for successful application include perpetually wet surfaces and also large cavities on wood, concrete surfaces.

Adequate ventilation is an ideal situation as it helps in drying and the good application itself. Avoid high humid conditions i.e., >95% when condensation is likely to interfere and also when the surface temperature is at least 3°C above dew point. One can add 5 to 10% of sweet water for ease of application depending on the suitability of application. Application is done with appropriate roller to give the desired texture.

Caution:
a. Over diluting would result in a flat and wrong texture.
b. In case of hot climatic conditions were the substrate could be very hot it is necessary that adequate cooling is done after the primer is applied and before the application of  the texture with good amounts of cold water.

Under dry and cool condition, storage stability can be sound up to 12 months in original sealed containers.

HANDLING
Disposal: As per the guidance and legislations of the local Authority e.g., by controlled landfill. In case of doubt, consult local authority. Do not empty into drains, sewers or other water courses.
Flash Point: Not applicable.

Avoid contact with the skin and eyes. Wear suitable protective clothing such as overalls, goggles, dust mask and gloves. Use a barrier cream. Other industrial practices are applicable. Ensure that there is adequate ventilation in the area where the product is being applied. Do not breathe vapor or spray.
MSDS is available on request for the safe handling of this product.

FIRST AID
Eyes: In the event of accidental splashes, flush eyes with warm water immediately and obtain medical advice.
Skin: Wash skin thoroughly with soap and water or approved industrial cleaner. DO NOT USE solvent or thinners.
Inhalation: Remove to fresh air, loosen collar and keep patient rested.
Ingestion: In case of accidental ingestion DO NOT INDUCE VOMITING. Obtain immediate medical attention.